全自動雙線三端穿護套合壓端子機HRG-2803-3HY
 

Full automatic two wires combined crimping machine with sleeves inserting (three ends)
 

一、特點Features

1.OTP橫式卡模和直式卡模均能使用，并且能夠快速調換使用；
2.采用電腦式自動檢測，氣壓低下、馬達異常、打端檢測、端子有無等異常時自動停機，并顯示出故障原因，方便快捷排除故障；
3.采用電腦數控調試、上銀導軌絲桿。伺服與步進電機相結合精確、高效、穩定

1.OTP horizontal mode and vertical mode can be used, and can be exchanged quickly
2.Adopt the computer type automatic detection, when the air pressure is low, the motor is abnormal, the terminal is exists or not, the machine will stop automatically, and show the fault reason, convenient and quick troubleshooting
3.Adopt CNC debugging and Hiwin guide and screws.The combination of servo and stepper motor is precise, efficient and stable




二、參數資料Parameter

功能 Function	兩根線的一端并打（合壓）在同一顆端子上；同時單線的另外二端完成單端壓著；兩根電線上下疊壓在一顆端子上，也可以并排壓在一顆端子上 The ends of the two wire are crimped(combined crimping) together on the same terminal,while the other two ends of the two wires complete the single end crimp. The two wires are superimposed on a terminal, or can be crimped side by side on a terminal
電源 Power supply	AC220V/110V  50/60HZ(單相/Single phase)
功率 Power	3000W
加工線徑 Wire process range	AWG24-AWG12
切斷長度 Cutting length	45mm-9999mm
剝皮長度 Stripping length	0.1-15mm
沾錫長度 Tinning length	1.0mm-5mm
切斷精度 Cutting accuracy	0.2mm士0.002*L（切斷長度/cutting length）
壓著能力 Crimping ability	標準2噸（可訂3噸） Standard 2T (3 T can be customized)
生產率 Speed	2200條 2200 pcs/h
氣壓 Air pressure	0.5-0.7Mpa(需使用清潔干燥氣體) (use clean and dry air)
外型尺寸 Dimension	L2100*W1200*H1580mm
重量 Weight	約600kg