|
|
| 全自動端子機
|
當前位置: 宏日鋼首頁 > 全自動端子機 > 全自動高速雙頭排線端子壓著機HRG-2819
|
|
| 全自動高速雙頭排線端子壓著機HRG-2819 |
一、特點Features 和國內同類設備比，技術含量高、性價比最高、速度最快、穩定性好、使用成本低、操作和維修簡便。 適用范圍廣：主要是用于壓著：JC,PH、XH、EH、ZH等端子，2468/2651規格的紅白排、藍白排、灰排等排線。 Compared withdomestic similar equipment, it has high technology content, the highest costperformance ratio, the fastest speed, good stability, low use cost, easyoperation and maintenance. Mainly used for pressing: JC, PH,XH, EH, ZH and other terminals, 2486/2651 specifications red and white row,blue and white row, gray row and other flat flexible cable. |
| 咨詢熱線：0512-5711 5729 |
|
| 產品詳情 |
一、特點Features 和國內同類設備比，技術含量高、性價比最高、速度最快、穩定性好、使用成本低、操作和維修簡便。 適用范圍廣：主要是用于壓著：JC,PH、XH、EH、ZH等端子，2468/2651規格的紅白排、藍白排、灰排等排線。 Compared withdomestic similar equipment, it has high technology content, the highest costperformance ratio, the fastest speed, good stability, low use cost, easyoperation and maintenance.
 
二、參數Parameter
功能
Function | 排線裁線剝皮兩頭打打端，單頭打，雙頭打，間隔打，正反打
Flat flexible cable cutting,stripping,double ends crimping,single end crimping,spacing crimping and positive and negative crimping | 外形尺寸
Dimension | 1.65mX0.75mX1.5m | 重 量
Weight | 300kg | 工作氣壓
Aire pressure | 0.4Mpa-0.6Mpa(需使用清干燥氣體)
(use clean and dry air) | 工作電壓
Power supply | AC220V/110V 50/60HZ(單相/Single phase)
| 功率
Power | 500W | 切斷長度
Cutting length | >85mm | 剝皮長度
Stripping length | 2mm-10mm | 線材端子種類
Type of wire and terminal | JC,PH、XH、EH、ZH等端子，2468、2651
如灰白排/藍白排/紅白排/彩排等
JC, PH, XH, EH, ZH and other terminals, 2486/2651 specifications red and white row, blue and white row, gray row and other cable. | 較大線寬
Max cable width | 35mm | 單根線徑
Single wire OD | 0.8mm-3.0mm | 打端子效率
Speed | 23000PCS/H(排線10P,100mm2468線時) | 端子壓接精度
Crimping accuracy | 無視覺定位≤±0.15mm，有視覺定位≤±0.05mm（可選）
No visual positioning≤±015mm
visual positioning≤±0.05mm | 檢測裝置
Detector
| 端子壓接不良、端子有無、送料故障、機器異常 、氣壓檢測
Terminal crimping bad,terminal exists,feeding fault,abnormal machine,pressure detection |
|
|
新能源電纜線自動裁線剝線機
